User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
37
Figure 4.24
Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut
down the power of the camera until the IP camera is able to connect to the wireless network.
The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless
connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of the camera will
show again on the window of the IP Camera Tool. The IP address may have changed after the camera receives a wireless
connection; we recommend setting a static local IP address if this IP address changes by right clicking the camera in IP
Camera Tools, setting a static IP, and pushing OK.
Congratulations! You have set up the wireless connection of the camera successfully.
WPS (WI-FI Protected Set-up)
Step 1) Press and hold the WPS button for two seconds.
1 Click the SSID of your router
and the relevant information
will be filled in the fields
automatically .
2 Enter the password
of
y
our route
r
.