User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
38
Figure 4.25
Step 2) Press the WPS button on your router within 60 seconds. The WPS button is usually on the back or side of your
router. On some routers, you may need to log in to the web interface and click on an on-screen button to activate the
WPS feature. If you are not sure where the WPS buttons is on your router, please refer to your router’s User Manual.
The camera will automatically create a secure wireless connection to your router. If you have plugged in the network
cable, please plug it out. The IP Camera Tool will search the camera’s LAN IP. Make sure the PC and the camera share
the same subnet.
NOTE :
The security mode of router cannot be WEP, or else the WPS settings may be failed.
4.3.3 PPPoE
If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE account.
Figure 4.26
WPS Button