User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
20
dropdown list, and click go button, the camera will go to the preset position.
Section 6 Guard Position
After setting the guard position, your camcorder will automatically return to the guard position within a
predetermined time (manually setting) when it stops moving (manually or cruise). You could refer to the
following method in chapter 4.7.4 ( Guard Position Settings).
Section 7 IR LED Lights
Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule.
Auto: Select it and the camera will adjust the infra led (on or off) automatically.
Manual: Select it and you can turn on or turn off the infra led manually.
Schedule: Scheduled control. When it is selected, the function of switching on/off the infrared lamp as
scheduled is enabled (Settings> Video > IR LED Schedule ).
Section 8 Image quality settings
In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
Section 9 OSD
If you have added time and camera name in the video, you can see it in the live window.
Go to Settings --- Basic settings--- Camera name panel, and you can change another device name. The
default device name is anonymous.
Go to Settings --- Basic settings--- Camera time panel and adjust the device time.
Go to Settings --- Video --- On Screen Display panel, you can add or no add OSD.
Section 10 Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button