User's Manual

www.foscam.com

45Shenzhen

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Step 2, DO DDNS Service Settings within the Camera

Please set DDNS Settings within the camera by hostname,auser name and password you’ve got from

www.no-ip.com

Take hostname ycxgwp.no-ip.info,usernamefoscam, password foscam2012 for example.

Firstly, goes to option of DDNS Settings on the administrator panel.

Secondly, select No-Ip as a server..

Thirdly, fill foscam

as DDNS user, fill password foscam2012 as DDNS password, fill ycxgwp.no-ip.info as

DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS

settings effective.

Fourthly, after the restart, login the camera, and go to option of Device Status

on the administrator panel, and

check if the DDNS status is successful.

If failed, please double check if you have input the correct hostname, user name, and password, and

try to redo the settings.

If you have set Third Party DDNS successfully ,the Foscam Domain Name will be invalid. The Third Party

DDNS and the Foscam Domain Name cannot work at the same time, the last time you configured will take

effect.

②

Do port forwarding within the router

Example: The camera’s LAN IP address is http://192.168.8.100:2000

, Media port no. is 9200.

Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue

Server on some brands of router). Take Linksys brand router as an example, Login the router, and goes

to Applications & Gaming->Single Port Forwarding.

Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within the router showed

as below.

Note