User's Manual

www.foscam.com

47Shenzhen

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Figure 4.30b

The camera’s software will be configured for port forwarding. There may be issues with your routers security

settings, and sometimes may error. We recommend you configure port forwarding manually on your router

(Figure 4.29).

4.3.6 Port

This camera supports HTTP Port. HTTP Port is used to access the camera remotely. If you want to access the

camera and view the video, the HTTP Port must both be configured correctly.

HTTP port: By default, the HTTP port is set to 88. Also, they can be assigned with another port number

between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21.

Figure 4.31

Another way to change the HTTP port no.

Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP

address, and click on ”Network Configuration”, this brings up the network configuration box as shown in Figure

4.32 and 4.33.