User's Manual

www.foscam.com

63Shenzhen

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Figure 4.56

Step 07: Click Save button to take effect.

When the motion has been detected during the detection time in the detection area, the camera will alarm and

adopt the corresponding alarm indicators.

NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and

anytime.

4.5.2 IO Alarm

This IP camera provides a I/O alarm terminal block which is used to connect to external input / output d evice.

The alarm device(door sensor, infrared sensor, smoke detectors, etc) send input command to the network

camera, then the network camera send output command to the alarm output device(local audible alarm, lights

alarm,etc.).