User's Manual

www.foscam.com

71Shenzhen

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

4.7.3 Start-Up Options

Here section will allow you to set the stop position after the camera reboots.

It supports three modes: No self test, Goto home position and Goto preset point.

No self test: When rebooting, the camera will not pan / tilt.

Goto home position: When rebooting, the camera will pa Providing Central Management Software to

manage or monitor multi-cameras n / tilt and stops at center.

Goto Preset point: Select one preset position and save it. When rebooting, the camera will pan/ tilt and stops

at the preset position you have set.

Figure 4.71

4.8 Firewall

This section explains how to control the access permission by checking the client PC’s IP addresses. It is

composed of the following columns: Block access from these IP addresses and Only allow access from

these IP addresses..

Figure 4.72