User's Manual

www.foscam.com

74Shenzhen

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

1) Before upgrade the firmware, please unplug the SD card and reboot the camera, don’t upgrade the

firmware in WAN through the web UI, or else the upgrade process may be failed.

2) Please ensure you have download the correct firmware package for your camera before upgrading. Read

the upgrade documentation (readme.txt file) in the upgrade package before you upgrade.

3) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the

readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will

not function correctly if a corrupt .bin file is used.

4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device System

Firmware.

5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected.

6) After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to the

default factory settings before using the camera.

4.10.3 Factory Reset

Click All reset and all parameters will return to factory settings if selected. This is similar to press the Reset

button on the bottom of the camera..

Figure 4.77

4.10.4 Reboot

Click Reboot System to reboot the camera. This is similar to unplugging the power to the camera.

Figure 4.78

5 APPENDIX

5.1 Frequently Asked Questions

NOTE: Any questions you would meet, please check Network connections firstly. Check the working status

revealed by the indicators on the network server, hub, exchange and network card. If abnormal, check the