User's Manual

www.foscam.com

78Shenzhen

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Upon releasing the reset button, wait for 20 seconds, the camera will reboot and the username and password

will return to the factory default administrator username and password. Please power on the camera before

reset

Default administrator username: admin

Default administrator password: No password

5.1.4 Camera can not record when I click Record button or I can’t change

the manually record path

When you use Windows7 or Vista, you may be not able to do manually record or change the record path

because of the security settings of computer.

There are two ways to resolve this problem:

(1) Please add the camera as a trusted site to resolve this issue. The steps are

IE browserToolInternet PropertiesSecurityTrusted sitesSitesAdd

(2) Open IE browser, then right click, select “Run as administrator”

5.1.5 Subnet doesn’t match

Check whether your ipcamera in the same subnet of your computer. The step is Control PanelNetwork

ConnectionsDbclick Local Area Connections  Choose GeneralProperties. Check subnet mask, IP

address and gateways. When you set IP address please make sure they are in the same subnet. Otherwise

you can't access camera.

5.1.6 No Pictures Problems

The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn’t installed correctly you

will see no video image. You can resolve this problem by this way:

Download ActiveX controller and set the safety property of IE in the PC when you view it first time: IE

browser ToolInternet Proper SecurityCustom Level ActiveX control and Plug-ins. Three options of

front should be set to be “Enable”, The ActiveX programs read by the computer will be stored. As follows:

Enable: Download unsigned ActiveX controls

Enable: Initialize and script ActiveX controls not marked as safe

Enable: Run ActiveX controls and plug-ins