User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
83
address and gateways. When you set IP address please make sure they are in the same subnet. Otherwise
you can't access camera.
6.1.6 No Pictures Problems
The video streaming is transmitted by the ActiveX controller. If ActiveX controller isn’t installed correctly you will
see no video image. You can resolve this problem by this way:
Download ActiveX controller and set the safety property of IE in the PC when you view it first time: IE
browserToo lInternet ProperSecurityCustom LevelActiveX control and Plug-ins. Three options of
front should be set to be “Enable”, The ActiveX programs read by the computer will be stored. As follows:
Enable: Download unsigned ActiveX controls
Enable: Initialize and script ActiveX controls not marked as safe
Enable: Run ActiveX controls and plug-ins
Figure 6.6
If you allow the ActiveX running, but still could not see living video. Please change another port number to try.
Don’t use port 88.
Figure 6.7
NOTE: Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could