User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
54
has been detected, the people around the camera will hear beep alarm sound.
BSendMail
If you want to receive alarm emails when motion is detected, you must select Send Mail and set Mail Settings
first. The alarm email cannot contain the alarm picture if you have not selected Snap picture.
C Snap picture
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as
a still picture and load it to the FTP. If you select Send Email, at the same time the picture will be send to you as
an attachment. Make sure you have set FTP and set FTP as the storage path in Video->Snapshot Settings
panel.
Time interval: The interval time between two pictures.
5 Set Detection Area
Click set Detection Area and it pop up a window, then you can draw the detection area. Click OK button after
settings. When something moving in the detection area, the camera will alarm.
Figure 4.56
6 Alarm Schedule
① Alarm anytime when motion is detected
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will alarm.