User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
56
7 Click Save button to take effect. When the motion is detected during the detection time in the detection area,
the camera will alarm and adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.
4.6 Record
4.6.1 Storage Location
On this page you can change the manually recording storage path, the default storage path is
c:\IPCamRecord.
Figure 4.60
4.6.2 Local Alarm Recording
On this page you can enable local alarm record, and select the local alarm record time.
Figure 4.61
4.6.3 Schedule Recording
On this page you can enable schedule record.