User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
58
are in the IP list cannot access the Network Camera.
Click Save to take effect.
4.8 System
In this panel, you can back up/restore your camera settings, upgrade the firmware to the latest version, restore
the camera to default settings and reboot the device.
4.8.1 Back-up& Restore
Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future
use.
Click Browse and select the parameters file you have stored, then click Submit to restore the restore the
parameters.
Figure 4.64
4.8.2 System Upgrade
Click Browse, choose the correct bin file( System firmware or Web UI) and then click System upgrade.
Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result.
Figure 4.65
If you want to verify the firmware version of you camera, please go to Device Status-> Device Information
Page to check.