User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
60
the upgrade documentation (readme.txt file) in the upgrade package before you upgrade.
3) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt
file. If not, please download the firmware again until the sizes are the same. Your camera will not function
correctly if a corrupt .bin file is used.
4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device Firmware.
5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected.
6) After upgrade successfully, please clear the cache of browser, uninstall the old plugin and re-install it, then
reset the camera to the default factory settings before using the camera.
4.8.3 Factory Reset
Click Factory Reset button and all parameters will return to factory settings if selected.
Figure 4.68
4.8.4 Reboot
Click Reboot to reboot the camera. This is similar to unplugging the power to the camera.
Figure 4.69
5 Appendix
5.1 Frequently Asked Questions
NOTE: Any questions you would meet, please check Network connections firstly. Check the working status
revealed by the indicators on the network server, hub, exchange and network card. If abnormal, check the
network connections.
5.1.1 Install / uninstall the ActiveX of Firefox browser.
5.1.1.1 Install the ActiveX of Firefox browser.
For the first time login the camera, it may prompt you to download plugin.