User's Guide

15
When mounted close to the ground, make sure the bottom of the camera is
at least 20CM from the ground.
The camera can work well when raining. If the camera fogs or gets water but works properly, shut it off immediately and
remove the battery. Wipe off any water or fog with a dry towel, then open the cover of the camera and place it upright in a
ventilated area to dry completely before using.
Not working
properly when using
external power
supply
Poor power contact
Check each interface to ensure that they are firmly connected.
External power supply error
Replace the qualified external power supply. Requirements: Output voltage
DC 12V(+ 5% or-5%), output current ≥ 2.0A. If the voltage is too low,the
camera cannot work, if the voltage is too high voltage the camera will be
damaged.
Other questions
The camera can be turned on, but there are
other abnormal problems
Try the following way:
1. Replace a fully charged battery.
2. Replace a qualified memory card and format it with the camera.
3. Return the camera to the default settings and restart.
If the above method cannot solve the problem, the camera may be damaged, please contact the dealer.
4.2Specification
Network
LTE/HSPA/GSM 4G/3G/2G network
Sensor
CMOS sensor ，Max 14MP(interpolation)
Lens
F=2.5 f=8.7mm , view angle:50°
Storage medium
Support SD card, Max to 128GB
PIR trigger time
0.5s
IR spec. & qty
940nm/40pcs，The brightness is adjustable
PIR sensitivity
Adjustable
PIR sensitive distance
0~18m
PIR angle
90°
PIR delay
10s~5min
Working Mode
Photo mode/Video mode
Photo resolution
JPEG 14M
Video resolution
Format：MP4，support H.265 resolution：2.7K
Video Length
5s
Language
Automatic switching with mobile phone
Microphone
Yes, Built-in
Speaker
Yes, Built-in
Working voltage
DC 12V
Battery
8pcs AA battery
External power supply
DC 12V/1.5A
Stand-by time
About 150days（8pcs AA batteries）
Waterproof level
IP66
Dimensions
149（L）×104（W）×69（H）mm
Weight
Approx 280±5g(battery excluded）