User's Manual

Starting up the projector
1. Touch" m "from Touch panel,
or from the Remote control, you
can choose
USB/TF/HDMl1/HDMl2 /PC-
RGB(VGA)/AV different source in.
2.You
can connect different
devices with the projector,
according to the connection part
of this manual.
You
can install your projector in
the following ways.
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment
off before making any connections.
2. Use
the correct signal cables for each source.
3.
Make sure the cables are firmly inserted.
In
the connection illustrations shown below, some cables may not
be included with the projector (see standard accesories). They are
commercially available from electronics stores.
You can install your projector in the following ways.
Connecting with video equipment