User's Manual

Shenzhen Friendcom Technology Development Co., Ltd.
18
Scan modes are set up in “Option” and shown as below
0 ---------normal scan with carry only
1 ---------normal scan, carry with tone
2 ---------priority scan, carry only
3 ---------priority scan, carry with tone
If normal scan is enabled, radio will scan from initial channel to channel 16 sequentially. If priority scan is
enabled, radio will scan the prioritized channel with more times. Prioritized channel is the working channel
before the scan. For example, if prioritized channel is CH10 and initial channel is CH8, then the scan sequence
is CH8, CH10, CH9, CH10, CH10, CH10, CH11, CH10.....CH16, CH10.
4.2.4.4.6 Others
As mentioned above, the BUSY signal, SWITCH and CTCSS/DCS will only be available after 2 minutes when
user finish programming setting. If you click here, user does not need to wait the 2 minutes.
5 Maintenance and Repair
5.1 Dimensions
Fig.17 Top View