User's Manual

Shenzhen Friendcom Technology Development Co., Ltd.

Fig. 18 Exterior View

5.2 Removing & Replacing the Upper Cover

Removing the Upper Cover

1. Unscrew the four upper cover mounting screws located on the upper cover of radio

To replace the Upper Cover

1. Reserve the steps taken to remove the Upper Cover.

Fig. 19-Upper Cover Removal

5.3 Removing & Replacing the Power Board & Modem Board & Shield Plate

Removing the Power Board & Modem Board Assembly & Shield Plate

1 Removing the Upper Cover (refer to Removing & Replacing the Upper Cover )

2 Disconnect the DB15 pin connector on CON14.

3 Unscrew the 4 monting screws.

4 Remove the Main Board Assembly.