Manualshelf

User's Manual

ManualsBrandsShenzhen Fudasi Technology ManualsElectronicsPhottix Strato II Multi 5-in-1 Trigger
123456
Connecting a flash to the Strato Multi transmitter hot shoe
1.Turn off the flash and the Phottix Strato Multi Transmitter.
2. Slide the flash into the transmitter’s hot shoe mount.
3. Lock the flash with the flash’s locking mechanism.
4. Turn on the flash and the Phottix Strato Multi receiver.
5. Set the flash to Manual mode (receiver only).
* It is not unusual for the flash to discharge once after turning on the Phottix
Strato Multi.
Using the Strato Multi as a wireless shutter release*
Strato Multi
1. Turn off the camera and the Phottix Strato Multi receiver.
2. Attach the correct Phottix Accessory Cable for your camera make and model
to the 2.5 mm Accessory Port on the Strato Multi receiver
3. Attach the other end of the cable to the camera’s remote port.
4. Turn on the camera and Phottix Strato Multi receiver.
5.Consult your camera manual for specific settings for remote use.
6.Using the Phottix Strato Multi transmitter will allow for remote wireless shutter
elease functions. The Strato Multi shutter button functions the same as a
camera shutter button: A half-press of the test/shutter button will autofocus, a
full press will take a photo.
*On compatible cameras
Using the Strato Multi as a wired shutter release*
1. Turn off the camera and the Phottix Strato Multi receiver.
2. Attach the correct Phottix Accessory Cable for your camera make and model
to the 2.5 mm Accessory Port on the Strato Multi receiver
3. Attach the other end of the cable to the camera’s remote port.
4.Turn on the camera and Phottix Strato Multi receiver**.
Consult your camera manual for specific settings for remote use.
5.The Phottix Strato Multi receiver will function as a wired shutter release
functions. The shutter button functions the same as a camera shutter button: A
half-press of the test/shutter button will autofocus, a full press will take a photo.
Phottix Strato Multi
*On compatible cameras
**Wired Shutter Release function can be used without turning on the Strato Multi
receiver, and will function without batteries in the receiver.
Warnings
- This product is a precise electronic instrument. Do not expose to damp
environments or dust.
- Do not drop or crush.
- Do not use harsh chemical(s) or solvents to clean the body. Use a soft
cloth or lens paper.