User's Manual

Cloud ip camera web client user manual
34
... Router has been upgraded to the latest firmware version
826 USER MANUA
... Restore your camera to factory settings by press “RESET” key one time on
camera bottom
... Disconnect router power supply and connect it again to restart
Try again to make your camera work after the above checking.
2). Why is network connection unstable?
Network cable may get a problem. You can PING the address of a existing
device in the same network. If network cable connects right and network connect
right, you should get a reply like bytes = 32 time = 2 ms.
Another possibility is that the network equipments like hubs and switches may
have problems. Ensure all network equipments connect and work well.
3). Why does the APP show camera not online?
This may be caused by firewall protection (such as MAC addresses filtering,
MAC address binding with the IP address). In this situation, please contact your
system administrator to check firewall. Firewall may need some configuration
changes. For more information, please refer to camera installation.
Ensure STATE1 ( ) or STATE2 ( ) flashes 3 times every 3 seconds.
Router default settings may have a problem. Ensure router DHCP server is on.
Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)