User's Manual

Cloud ip camera web client user manual

7). When I view on a web, there is no image. Why?

If you are using Internet Explorer, please make sure ActiveX is on. You may

need to modify the browser's security settings to allow ActiveX plug-in installed.

If you are using Internet Explorer versions earlier than 7.0, you need to upgrade

your Web browser.

8). Troubleshooting, LED status indication:

Indicator LED

status

Status Description Troubleshooting

POWER

(power

indicator)

Red light

Normally on

Power supply is

normal

If light is not lit, check the power

supply is damaged or the camera

hardware failure, requiring repair.

STATE1/STA1

( )

(OFF

Wifi was disabled by

the user or wifi

hardware failure

1. Press RESET for 5 seconds to

restore the factory settings.

2.Make camera with wired Ethernet

connection, after landing, in the

"Manage" -> "Network" ,make WIFI

enabled;

3. Camera hardware failure, requiring

repair.

Red light

Normally on

WIFI router is trying

to connect

1. Verify WIFI router is good;

2. Try the camera placed from

somewhere near WIFI router and

then reconnect the power.

3. Restart WIFI routers and cameras;

4. Camera hardware failure, requiring

repair.

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)