User's Manual

Cloud ip camera web client user manual
38
camera via cloud
services
Red \
green
lights
flashing
alternately
Wi-Fi for adhoc mode
(Wi-Fi did not
configure the router /
router connection
failed / DHCP fails to
enter this mode), you
can Wi-Fi terminal
(mobile phone / pad /
notebook computers)
connected to the
wireless network, and
then access the
camera through
192.168.188.254.
References Cloud Camera Quick
Installation Guide
STATE2/STA2
( )
(OFF
Ethernet is disabled
by the user or the
network cable is not
connected or
Ethernet card
hardware failure
1. Users press RESET 5 seconds to
restore the factory settings.
2. Check \ replace the camera and
connect the network cable between
the routers.
3. Camera hardware failure, requiring
repair.
Red light
Network cable is
connected, the IP
address is obtained
1. Please make sure your routers
DHCP server is enabled.
2. Try to restart the router.
3. Manually assign a letter to the
Ethernet IP address of the router the
same gateway.
Flashing
red
IP address has been
obtained or the user
to configure a static
IP address, is trying
to communicate with
the gateway
1. Confirm whether the router is good.
2. Camera hardware failure, requiring
repair.
Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)