Users Manual

-12-
Cell Phone Signal Solutions
1.The signal booster will only work with the correct frequency, so please make sure
your phone signal is with the same frequency as the signal booster.
2.This cell phone signal booster will only make a weak signal stronger, it can't
create a signal. That means it won't work if the outdoor antenna can't receive any
signal.
3.The outdoor antenna should receive 2-3 bars of stable signal in the location
where the outdoor antenna is fixed; otherwise, the booster won't work very well.
4.Must connect the antennas first, and then switch on the power; otherwise, may
damage the repeater.
5.Determine the best location where the highest signal strength is received on your
phone (most amount of bars). Once you ascertain the best location, then
permanently mount the outdoor antenna. Keep the distance between the outdoor
antenna and indoor antenna more than 22ft and make sure that there is a proper
physical separation between the outdoor antenna and indoor antenna. The above
things are of critical importance to the boosters' normal working .
Remark: Distance Control between Outdoor and Indoor Antennas
* In a fully open environment, keep the horizontal distance between antennas over
15m and vertical distance over 3m.
* In a environment with walls, keep the horizontal distance between antennas about
7-8m and vertical distance about 3m. (The walls should be in metal or reinforced
concrete, as the material in wood, glass or carbon fiber can’t block the signal)
* If available, it’s better to keep the horizontal distance between outdoor and indoor
antennas at 15m; if can’t achieve the 15m, try to increase the vertical distance.
1.Tightly connect the 32ft Coaxial Cable to the Outdoor Yagi/LDPA Antenna.