Users Manual

Cell Phone Signal Solutions
-20-
Increase the output power*---Recommended ways: adjust the outdoor antenna
direction/location, or replace with a higher gain antenna to increase input signal
strength.
1.Signal Booster
2.Indoor Antenna
3.Outdoor Antenna
4.Coaxial Cable
5.Power Adapter
6.User Manual
•The power is on but there is no signal strength on the phone.
It could be caused by insufficient isolation between outdoor antenna and server
antenna.
Please try the measures below:
First check whether the connection is correct.
Second adjust the antennas’ directions/locations or enlarge the distance between
them.
Third replace the original one with a lower gain repeater if you have one as a
backup.
The following measures can also be tried:
Use the roof of the building to increase the isolation ( please try to place the
outdoor antenna and indoor antenna on different floors ).
Use some obstacles ( such as wall ).
•The power is on, but the phone is not connected into the network and still
cannot communicate.
You should receive the Mobile Booster kit which includes the similar above-mentioned
fittings. Before using it, please confirm that your Booster’s frequency range is the same
as your service provider’s network, otherwise, the amplifier will not work properly.