Troubleshooting Guide

17
3.4.Switch on the power
After power is on, first check the alarm and power LEDS.
The status and definition of POWER indicators:
3.5.CheckCoverage
(1) PerformatestwithamobilephoneordatacardCheckbelow:
- A weak input signal leads to the low output power. Need to change the direction
of outdoor antenna or its installation position or replace outdoor antenna with
higher gain antenna to increase input signal powerlevel.
- Check whether it is necessary to add more Indoor antennas’ sine barriers to
block the signal penetration, and check whether the repeater’s power is enough.
InstallmoreIndoorantennasorreplacewitharepeaterofhigherpowerlevel。
Statu
s
Definition
Gree
n
Normal
Off DC power
problem