Troubleshooting Guide

5
Option C：Mount the Indoor Panel Antenna
Installation Steps:
1. Using the plate mark the position of desired screw placement.
2. Screw mounting plate into place with the slide protruding towards up.
3. Hang the antenna securely onto the mounting plate.
4. Connect the antenna short cable to the 15ft cable and run to the planned
location of your booster.
. 5. Place the booster on a flat surface or mounted to a wall and connect
the remaining end of the cable to booster port marked INDOOR.
Note:
1. The Inside Panel Antenna should be facing the area signal is needed and
away from the outdoor antenna (See “Aiming Panel Antenna” below).