Troubleshooting Guide

9
Option D:Mount the Omni-directional Antenna
Installation Steps:
1.Assemble the u-bolt, bracket, nuts and washers onto a mast (not
provided) as shown in the illustration.
2.Connect one end of the provided coax cable to the antenna and
tighten the connection.
Note
:
1.The Omni Antenna receives and sends signals in a 360-degree
radius. Mount the antenna at the highest possible elevation and in
an upright position.
2.Ensure that the entire outside antenna is above the roof
line of the building and is at least 12 inches away from any
metal obstructions and other radiating elements.
3.The minimum distance between outdoor antenna and indoor antenna
shall be more than 39ft; and the direction of outdoor and indoor antennas
shall be opposite.