Quick Setup Guide

Continued on
Other Side
NOTE: Internet is not required for pairing, but is required for remote viewing features.
NOTE: Our WNIP8 Series cameras cannot be added to our BTD2 Series DVRs.
IMPORTANT - To add a Wi-Fi IP camera to your wired DVR both devices must
be connected to the same Internet (Local Area Network).
Wi-Fi IP Camera
Quick Setup Guide
Flexible Setup Options:
Option 2a
Setup Video
Option 1
Setup Video
STOP: Only install a camera in its final location AFTER it’s paired and setup is complete.
Ensure your wired DVR has been added to your Night Owl Protect account.
Power on your new Wi-Fi IP camera using the provided power adapter.
Log in to the Night Owl Protect App from your Smart Device.
Tap on “Add New” or “+” and follow the simple on-screen steps.
Series:
BTD2 / BTD8
Model #'s:
DVR-BTD2-81 DVR-BTD2-16 DVR-BTD8-8 DVR-BTD8-82
DVR-BTD8-41 DVR-BTD2-161 DVR-BTD8-81
Series: Model #'s:
BTWN8 WNVR-BTWN8-1
First Time User? Download Night Owl Protect. Create an account and
log in with your username and password. Already have an account?
Log in with your username and password!
Product images in setup videos may vary by model, but the setup is the same.
Tap “Add New” or “+” and the app will guide you through the setup
process.
Option 2:
Add on Camera - Connecting to your Night Owl Recorder:
Wired Bluetooth
®
DVR:
Wi-Fi Bluetooth
®
NVR
Option 1:
Standalone Camera - Connecting to your Wi-Fi Network:
Option 2b
Setup Video
1
2a
2b
2
3
Power on your new Wi-Fi IP camera using the provided power adapter.
Log in to the Night Owl Protect App from your Smart Device.
Tap on your existing BTWN8 Series Wi-Fi NVR.
Tap on “Add New” or “+” to add your new Wi-Fi IP camera.
Follow the on-screen steps to pair your new Wi-Fi IP camera.
1
2
3
4
5
4
NEED HELP?
For system manuals, troubleshooting guides, FAQs, video tutorials and more:
Please visit Support.NightOwlSP.com
Enter WNIP2-CM (for our 1080p Wi-Fi IP Cameras) or WNIP8-CM
(for our 4K Wi-Fi IP Cameras) into the Search bar.
Why Call? Our Support Site Has it All!
For more Support Videos, go to www.youtube.com/nightowlsp
FCC RADIATION NORM
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions,
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION!
responsible for compliance could void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and your body.
REV 1-210616
Option 2c
Setup Video
NOTE: Our WNIP2 Series Wi-Fi NVR is ONLY compatible with our WNIP2 Series cameras.
Series: Model #'s:
WNIP2 WNVR-WNIP2-1
Wi-Fi NVR
2c
Power on your new Wi-Fi IP camera using the provided power adapter.
Ensure your existing WNIP2 Series Wi-Fi NVR is connected to a TV/Monitor
(minimum 1080p resolution) via HDMI cable.
Right click on the screen using your system's mouse and then click on the
“ “ Startup Wizard.
Follow the on-screen steps to pair your new Wi-Fi IP camera.
1
2
3
4