Bluetooth RGBICW Floor Lamp
Congratulations! You've purchased the Bluetooth RGBICW floor lamp. Please read the user manual and warnings carefully and keep it for future reference. Correct installation is required, please follow the instruction step by step. After installation, this Bluetooth RGBICW floor lamp can be controlled by App or touchsensitive button on the lamp.
Metal Lamp pole C Male connector 2 Metal Lamp pole B1 B2 Female connector A
Insert the male connector of B to the female connector of A,then insert C in the same way
fix it with the screw Bluetooth RGBICW
Short touch to switch colors, 6 RGBICW color modes.
Short touch to switch colors, 6 RGBICW color modes.
Pair the RGBICW floor lamp to "Smart Life" App. RGBICW Make sure the Bluetooth of phone is open. And keep the device close to phone.
Step one: Open the Bluetooth function of phone and keep the device close to phone. Make sure the device is in pairing mode, the floor lamp will blink in white. Step two: Open the smart life APP, Step three: The app will scan and Click the “+” on the right corner to add device. find the device, click “Add”. Step four: Click “+” to star pairing. Step five: Then the floor lamp will be added successfully. Click Done to homepage.
APP functions: Color mode Dynamic mode Music mode DIY mode
Functions of RF remoter controller Demo mode: 15 dynamic modes switch automatically Short touch: On Long touch 5s: Reset to pairing mode Dynamic mode: 15 dynamic modes change. Mode+/Brightness+/Speed setting: In music or dynamic mode, speed+/- Timer 1H/2H/3H Color setting: 8 colors.
Bluetooth RGBICW floor lamp Digital RGB+ warm white Digital RGB + warm white, total 72 LEDs APP/Touch/RF Remoter controller RGBICW
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
