User's Manual

ManualsBrandsSHENZHEN GIEC DIGITAL ManualsComputers & AccessoriesHubitat Elevation Hub

Hubitat Elevation User Manual

Setup

1. Plug in the supplied ethernet cable to your network and then to the back

of the hub.

2. Plug in the supplied USB power cable to the hub and then to the supplied

power plug.

3. Plug in the power plug into an outlet, the light on the front of the hub

should turn blue and is ready to be discovered.

Find Your Hub

1. Visit portal.hubitat.com

2. Click on Find Hubs, your new Hub should appear in the Hubitat Elevation

list.

3. Click the picture of the hub to go to the hub Web Interface.

4. Review and agree to the Terms of Service.

5. Read through a brief tutorial and helpful tips.

6. Set up your location by naming your Hub and entering your postal code

(optional, US/ CAN / UK only).

7. Click Save. You are now at the Main Menu of your Web Interface.

Summary of content (4 pages)

PAGE 1
Hubitat Elevation User Manual Setup 1. Plug in the supplied ethernet cable to your network and then to the back of the hub. 2. Plug in the supplied USB power cable to the hub and then to the supplied power plug. 3. Plug in the power plug into an outlet, the light on the front of the hub should turn blue and is ready to be discovered. Find Your Hub 1. 2. Visit portal.hubitat.com Click on Find Hubs, your new Hub should appear in the Hubitat Elevation list. 3.
PAGE 2
Register Your Hub* 1. In the top right of your Web Interface, you will see a message in red, click on the link in the message to go to the registration page on your hub. 2. Click the Continue button, this will take you to portal.hubitat.com. 3. Login or create a new account if you haven’t already. 4. After login, you will be redirected back to your hub once your hub is registered. 5. You can add additional accounts by visiting My Hubs on portal.hubitst.
PAGE 3
Get Automated With all your devices connected, the fun begins! You can start automating devices using the built-in apps (or create your own!). To install an app: 1. Click Apps. 2. Click the Load New App button on the right. 3. Choose any app from the built-in apps and click on the app you wish to install. 4. Enjoy! Documentation Visit the online documentation at docs.hubitat.
PAGE 4
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.