User's Manual

Register Your Hub*
1. In the top right of your Web Interface, you will see a message in red, click on
the link in the message to go to the registration page on your hub.
2. Click the Continue button, this will take you to portal.hubitat.com.
3. Login or create a new account if you haven’t already.
4. After login, you will be redirected back to your hub once your hub is
registered.
5. You can add additional accounts by visiting My Hubs on portal.hubitst.com
and clicking on you Hub to add other accounts.
* Optional (required for Cloud Services and Mobile App)
Discover Zigbee and Z-Wave Devices
1. Click the Discover Devices link in your Hubitat Elevation Web Interface.
2. Factory Reset the device (check with manufacturer for instructions).
3. Select the type of device you want to pair (check manufacturer for type) .
4. Put your device in pairing or join mode. (check the manufacturer’s
instructions).
5. Within a few seconds, your device will appear on the Hubitat Elevation Web
Interface. If no, make sure your device is within range of your hub; usually 30
ft. or less.
6. Label your device and click Save.
7. Repeat Steps 1-6 for additional devices.