User Manual

Using display receiver as independent A/V monitor

Tip: When selecting AUX input as a source channel, VOL+/VOL- buttons on the Display Receiver are

disabled. Use source device's volume control to adjust audio output instead.

Select [AUX]

source channel

AUX

AV Out

The Display Receiver unit can be used as an independent A/V monitor by connecting a local source

device such as Cable / set top box, TV, Blu-Ray player, DVD player, VCR or Media player to the “AUX”

jack (an A/V combination mini plug socket) at the left side of the panel. In this mode, you can operate the

Receiver by powering on/off, volume controls and selecting AUX channels on the Home Roam TV Display

Receiver