Tablet PC Model: EM63 Diamondking Inc. 3913 schaefer Ave.
Disclaimer Contents 1 Over view 1 1.1 Appearance and Keys 1 1.2 Basic Operation 1 1.2.1 Switch ON 1 1.2.2 Unlock the Screen 2 1.2.3 Lock the screen 2 1.2.4 Switch OFF 2 1.2.5 Batter y charging 2 1.2.6 Switch input methods 3 1.2.7 Use T-Flash card 3 1.2.8 Connected to the computer 4 1.2.9 Browse the file in the device 4 1.2.10 Startup programs 5 1.2.11 Close programs 5 1.2.12 Screen operation 5 1.2.13 Home screen 5 1.2.14 Screen gestures 6 1.2.15 Security setting 7 1.2.
● Never let this product expose to the humid environment or rain as the water leaked in may disable it to the extent beyond maintenance. ● You are recommended not to use the headset with large volume continuously, please adjust the volume to the size of appropriate security and control the using time to avoid the damage to your hearing, as excessive volume will cause permanent hearing damage.
;TRUIQ ZNK YIXKKT 6RKGYK VXKYY GTJ JXGM ZNK OIUT ZU ZNK ZNKT ZNK 2)* ]ORR [TRUIQKJ G[ZUSGZOIGRR_ to make sure the battery is fully charged at the first time On chargiTM the Power OTJOIGZOTM RGSV UL ZNK JK\OIK OY OT NOMN ROMNZ HR[K IURUX ZNK JKYQZUV OIUT UL ZNK HGZZKX _ QKKV XURROTM ]NOIN YNU]Y OZ OY IUTTKIZKJ ZU ZNK JK\OIK 9]OZIN OTV[Z SKZNUJY :NK JK\OIK Y[VVUXZ NGTJ]XOZOTM T[SHKX RKZZKX VOT_OT KZI Y]OZINOTM GY LURRU]Y )ROIQ GT_ ZK^Z OTV[Z GXKG UL ZNK ]UXQOTM VXU
applied in one direction. 2. Do not remove the TF card before Uninstalling it, or the card may be damaged. 3. If the memor y card is write-protected, data will not be formatted and written, please remove the write protection before such operations 4. Major brands memor y card is recommended to avoid the card is not compatible to this device. 5. please well note that the APK (such as application software and games) is default installed to the device. (not the memory card) 1.2.
sliding your fingers on the screen quickly. ● Custom Home Screen Press the blank area on the home screen interface for a few seconds, it will appear Choose wallpaper from menu, then you can set the home screen. ● Move application icons on screen Press the icons of applications you need to move for several seconds, it will enter the moving model (the icon of application will be turn big), then drag the icon to expected position directly.
2. Click Continue and draw again to confirm it 3. Cilck confirm to complete unlock pattern designing. 4. Each time you open or waking your MID device, you must draw pattern to unlock the screen. Select the expected wireless network , the system will directly connect the network or popup the password input window according to network access security settings. Please consult your wireless network administrator for the password. 1.2.
:KINTOIGR YVKIOLOIGZOUTY 9O`K =KOMNZ 2)* *OYVRG_ 6) /TZKXLGIK L 7.6 x W 4.8 x H 0.4 inches 66 lbs 7 0 OTIN 1024 600 3[RZO VUOTZ IGVGIOZO\K ZU[IN YIXKKT .OMN YVKKJ 3OIXU ;9( 'TJXUOJ 1 59 .GXJ *XO\K )GVGIOZ_ 4-( 9_YZKS 3KSUX _ 1G DDR3 )GVGIOZ_ +^VGTYOUT 9[VVUXZ : ,RGYN IGXJ -( SG^ ,UXSGZ Mp3, WMA, OGG, AAC, 3GP, WAV etc. 3[YOI ,[TIZOUT .` 1.` 3G^ 8KYUR[ZOUTY ,UXSGZ Mp4, MKV, RMVB, AVI etc.
FCC STATEMENT 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg.
