User's Manual

GAN5.PT156A-B

Step3 In this page, select the WAN service type to be IP over Ethernet, enter

the service description, and enable IPv6 for this service. After finishing

setting, click Next to display the following page.

Step4 In this page, you may themodify the WAN IP settings. You may select

obtain an IP address automatically or manually enter the IP address

provided by your ISP. If you eable IPv6 for this WAN service, you should

also enter the next-hop IPV6 address. Click Next and the following page

appears.

Note:

If selecting Obtain an IP address automatically, DHCP will be enabled for PVC in

MER mode.

If selecting Use the following Static IP address, please enter the WAN IP address,

subnet mask and gateway IP address.