User's Manual

GAN5.PT156A-B
50
Figure 10 Setting the DHCP server
If you enable the DHCP sever, the clients will automatically acquire the IP address
from the DHCP server. If the DHCP server is disabled, you need to manually set the
start IP address, end IP address and the lease time for the clients in the LAN.
Editing the DHCP Option
Click the Edit DHCP Option button in the Local Area Network (LAN) Setup page to
display the DHCP Option Setup page.
In this page, you can add, edit or delete the DHCP options, and these options will be
sent to the DHCP client.
Edit Multi LAN
Click the Edit Multi LAN button in the Local Area Network (LAN) Setup page to
display the LAN IP Interface and DHCP Option 60 setup page.
In this page, you can configure LAN IP Interface and DHCP Option 60. The DHCP
server will assign one IP address based on you setting to DHCP client.
Click Add to display the following page.