User's Manual
GAN5.PT156A-B
53
Figure 12 Adding an entry of DHCP static IP lease list
In this page, enter the MAC address of the LAN host and the static IP address that
is reserved for the host, and then click the Apply/Save button to apply the settings.
Configuring the Second IP Address and Subnet Mask for a LAN
Interface
In the Local Area Network (LAN) Setup page, you are allowed to set the second IP
address and the subnet mask for a LAN interface.
Figure 13 Setting the second IP address and subnet mask
After enabling Configure the second IP Address and Subnet Mask for LAN
interface, enter an IP address and a subnet mask for the LAN interface.
After finishing setting, click the Apply/Save button to apply the settings.
IPv6 Autoconfig
Click Advanced Setup > LAN >IPv6 Autoconfig, and the following page appears.