User's Manual

GAN5.PT156A-B
56
Figure 16 Adding an entry of virtual server
Use interface: Select an interface that you want to configure.
Select a Service: Select a proper service in the drop-down list.
Custom Service: Enter a new service name to establish a user service
type.
Server IP Address: Assign an IP address to virtual server.
Status: Enable or Disable this entry.
External Port Start: When selecting a service, the port number will
automatically be displayed. You can modify it if necessary.
External Port End: When selecting a service, the port number will
automatically be displayed. You can modify it if necessary.
Protocol: You may select TCP/UDP, TCP, or UDP in the drop-down list.
Internal Port Start: When selecting a service, the port number will
automatically be displayed. You can modify it if necessary.
Internal Port End: When selecting a service, the port number will
automatically be displayed. You can modify it if necessary.
After finishing setting, click Save/Apply to save and apply the settings.