User's Manual

4-2. Installation of Receiver
4-2-1. Basic installation of Receiver
1. Connect the receiver to the adapter and then slide the power
switch to ON position.
2. Adjust the volume control to a desired level.
Note:
This receiver can also work on dry battery. Please load 4 AA
batteries to the battery compartment at the back of receiver with
their polarities matched.
The AC adapter will work instead of batteries after it is plugged.
If the receiver is left unused for a long period of time, please unplug
the adapter and remove the batteries.
Avoid short circuit of the battery.
* Continue working for 5 hours