User's Manual

3. Set the channel of receiver to be the same as camera by pressing the
channel button continuously, and the pictures will display on the
screen.
Note:
For more clear pictures, please connect the receiver to a monitor/TV
with AV cable (yellow for video and red for audio).
AV cable
1. Volume adjustment
Slide Volume Switch to adjust the volume of the receiver.
2. Channel selection
Press CH button to select the appropriate channel.
3. Channel Looping
Hold the CH button for three seconds to enter the loop mode. All
the available channels will be displayed one by one (default
interval is 5 seconds).
4. Sleep Mode
Press the Sleep Button to shut down the LCD display and keep
the voice function. Press the button again and recall the normal
working mode. It can save energy and help your sleeping.
5. Eliminate Alarm button
Press Eliminate Alarm button to eliminate alarm voice . Less
than 1 minute, the alarm enters again next circle automatically.
4-2-2. Operation of Receiver