Four-Channel Wireless Digital Surveillance System Model: 8005BU Version: 1.0 Made in China Thank you for your purchasing of our product.
Table of Contents Overview 02 Features 02 Packing List 02 Structure 03 Install and Connect 04-05 Operations 06-12 System Settings 13-17 Recording Settings 17 Alarm Settings 18 Attentions 18 Technical Parameters 19 FAQ 20 Troubleshooting 21 Overview This product is a home surveillance video recording device. It consists of a camera installed in each of the home's entrances and exits and a receiver with its own 7-inch LCD display.
Install and Connect Structure 1. Install the cameras in place for ideal monitoring and fasten with screws. Camera Antenna IR Light Lens RJ45 DC12V 2. Install the receiver in place. The receiver comes with two types of brackets, so there are two ways to install it: Fasten the bracket to the wall with screws and slide the receiver to snap onto the bracket. Receiver USB Port SD Card Slot Speaker MicroUSB Power Interface ① Stand it on a flat surface Bracket ② Mount it to wall (optional) Antenna 3.
Wireless Connection Operations Basic Operations 1. Connect the camera to mains. 2. Connect the receiver to mains. This method is used for Wireless connection. After connection, it can be operated on a Wireless or mobile phone. Notes: 1. In the effective range of wireless connection, the cameras can be connected to the receiver. If the distance is too far or there is an obstacle, wired connection is required. 2. The receiver cannot be connected to the router wirelessly.
CMS Client Download 1. Open the browser on PC and enter http://www.goscam.com in the address bar to visit the official website of GOSCAM. 2. Go to "Ser vices and Support" -> "Download Center" -> "Home Security" -> "NVR", download the "CMS Setup" and install it to your PC. CMS Client Operations Login: Double-click on the CMS app icon on the desktop to turn on the app and log in to the system; Initial ID is “admin” and there is no password. Add Device:(Select 1 of the 3 methods) 1.
Note: In the three methods as described above for device adding, after the device is added, you need to return to the “Device List” in the upper right corner of the home page to double-click or right-click “Connect Video”. Delete Device: 1. After login, click “Device Management” at the bottom of the screen, and select the device you want to delete in the upper right of the screen. Then, click “Delete” on the right and click “OK” in the pop-up dialog. Note: 1.
2. After registration and login, click “LAN Scan” on the screen. In the LAN state, the system will automatically search for the device. Once a search result appears, click the device you want to add. Receiver Operations Manual Recording: 1. In the real-time monitoring state, press the “ ” or “ camera that needs to record video as the current camera; ” button to select the 2.
Motion Detection Recording: When an object moves within the angle of view of any one of the cameras connected, the device can be triggered for recording. The specific steps are as follows: Language 1. Press MENU on the device to enter the settings interface. 2. Press the “ 3.
Wired Network Settings System Information Settings 1. Press MENU on the device to enter the menu interface; 2. Press OK to enter the wired network settings interface. 3. Select “Obtain an IP address automatically” and press OK to turn it on. Then, the device will automatically obtain a network IP address; or the IP address can be entered manually. Add by Pairing Settings 1. After the receiver and camera are powered on, the camera is connected to the receiver by a network cable; 2.
Recording Settings Alarm Settings 1. In the real-time monitoring state, press the “MENU” button on the device to enter the main menu interface; 2. Press the “ ” or “ ” button to select “Recording Settings” and press OK to enter the recording settings interface; 3. Press the “ ” or “ ” button to select an item and press OK to enter the settings interface.
Technical Parameters Items FAQ Parameters Cameras Image sensor 1/2.9",CMOS Video pixels 1920 x 1080P Horizontal viewing angle H:85° Night vision distance 20m (Max.) IP rating IP55 Interface DC JACK(○5.5mm) RJ45 Operating voltage Operating temperature -10℃~50℃ DC 12V/1A Operating humidity 15~85%RH Dimensions (length X width X height) 176x47x46(mm) (without bracket) Monitor Display 7"TFT LCD Display resolution 1024 x 600 SD card capacity Up to 128GB USB 2.0, DC JACK(○3.
Troubleshooting Problems FCC Certification lnfo Solutions Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to LCD does not display monitoring images Please check if the cameras are turned on. Check if the cameras have been "paired". Check if the storage medium has been inserted; hot swapping of storage medium is not supported. So, check if the problem is caused by hot swapping.