User Instructions

Wireless Connection
Notes:
1. In the effective range of wireless connection, the cameras can be connected to the
receiver. If the distance is too far or there is an obstacle, wired
connection is required.
2. The receiver cannot be connected to the router wirelessly. A network cable is required
for their connection.
This method is used for Wireless connection. After connection, it can be
operated on a Wireless or mobile phone.
05
06
3. After Poweron, the cameras and receiver will automatically start up, and then
real-time monitoring screen appears as follows:
Operations
2013/11/15/09:30
Image display area
2013/11/15/09:30
2013/11/15/09:30 2013/11/15/09:30
1 2
3 4
1. Connect the camera to mains.
2. Connect the receiver to mains.
Basic Operations
Note: The receiver can only connect up to 4 cameras; pairing has been completed by
default at the factory. If they have not been paired, please complete pairing
according to the description of “Pairing” on page 15.
Image display area
Image display area Image display area