User Instructions

Goseeview
1. Open the browser on PC and enter http://www.goscam.com in the address bar
to visit the official website of GOSCAM.
2. Go to "Services and Support" -> "Download Center" -> "Home Security" ->
"NVR", download the "CMS Setup" and install it to your PC.
CMS Client Download
Mobile APP Download
You can use your mobile phone to scan the QR codes below, or search “Goseeview”
in App Store or Google Play to download and Install the APP. Then, run the APP and
take a few minutes to register an account.
07
08
CMS Client Operations
Login: Double-click on the CMS app icon on the
desktop to turn on the app and log in to the system;
Initial ID is “admin” and there is no password.
Add Device:（Select 1 of the 3 methods)
1. After login, click “Device Management” at the bottom of the screen. Connect LAN Cable,
the system will automatically search for devices. Tick the camera to be added by adding
a mark “ ” in the “ ” and click “Add”.
2. After login, click “Add” in the upper right corner of the screen to bring up a
dialog box (as shown below). Select “IP/DDNS”, enter the IP address of the
receiver in the IP/DDNS field (the IP address of the receiver can be acquired in the
“System Settings”— Wired Network ") and select "NVR" in the Type field. Then,
click “Finish”.