User Instructions

When an object moves within the angle of view of any one of the cameras connected,
the device can be triggered for recording. The specific steps are as follows:
1. Press MENU on the device to enter the settings interface.
2. Press the “ ” or “ ” button to select “Alarm Settings” and press OK to enter;
3. Press the “ ” or “ ” button to select the channel to be set in “Channel 1-4”,
and press OK to enter;
4. Press the “ ” or “ ” button to select “Motion” and press OK to turn it on (this
function is enabled by default);
5. Press the “ ” or “ ” button to select “Mobile APP Alarm” and press OK to
turn it on (this function is valid only when the device is connected to the internet and
the device has been added in the mobile APP);
6. Press the “ ” or “ ” button to select “Alarm” and press OK to turn it on (this
function is enabled by default);
7. Press MENU to go back when the steps have been finished.
Motion Detection Recording:
System Settings
Main Menu
OK : Select MENU : Back
OK : Select MENU : Back
System Setup
Language
Time Setup
Wired Network
Match Code
Main Menu Interface System Settings Interface
1. In the real-time monitoring state, press the “MENU” button on the device to enter
the main menu interface;
2. Press the “ ” or “ ” button to select “System Settings”, and press OK to enter
the system settings interface;
3. Press the “ ” or “ ” button to select an item and press OK to enter the
corresponding settings interface.
13
14
Sen sor Set upVid eo Play back Sys te m Setup Rec ord S etup
Set system time and date;
1. Press MENU on the device to enter the menu interface;
2. Press OK to enter the language settings interface;
3. Press the “ ” or “ ” button to select an appropriate language, and press OK to
confirm and exit.
Add/remove camera;
The wireless SSID and password for point-to-point connection between the camera
and receiver cannot be set; appropriate regional frequency band can be selected
according to different regions;
View system information;
Whether or not to restore default settings;
Adjust the volume;
Receiver system upgrade;
Set system language;
Language
Time Setup
Wired network
Match Code
Wireless hotspot
System info
Upgrade
Factory settings
Volume
System
Settings Items
Functions
IPC upgrade
Camera upgrade;
Language Settings
Time Settings
OK : Select MENU : Back
System Setup
/ /
2018
11
15
:
09
30
Date
Time
1. Press MENU on the device to enter the menu interface;
2. Press OK to enter the time settings interface;
3. If the device has been connected to the Internet, enable the “Time Sync” function;
4. You can also make manual settings. Press the “ ” or “ ” button to select “Time
Settings” option and press OK to enter the time settings interface.
Press the “ ” or “ ” button to
select the change item;
Press OK to confirm;
Press the “ ” or “ ” button to
change;
Press MENU button to exit the time and
date settings interface.
Turn on or off "Automatically"; enter network parameters manually; suggest to
turn on " Automatically" to get the network parameters.