User's Manual

17
18
2. Press the or button to select camera;
3. Press the OK button to pair:
Pairing
OK:Options MENU:Quit
Camera-1
Paired
0xe01f0008
Camera-2 Paired 0xe01f0007
Camera-3 Paired 0xe01f0006
Camera-4 Paired 0xe01f0005
Pairing.....
Long press the PAIR button on TX for 2 seconds
52
4. Within 60s, press the Pairing button on the back of the camera
for 2s.
5. After successful pairing, the receiver screen displays the following
information:
Pairing OK
Congratulations!!!
Remarks:
If pairing fails, the system prompts “Pairing failed”. Please
perform pairing again.
● Active
1. Press the or button to select “Active”, press the OK button
to enter:
Active
OK:Options MENU:Quit
Camera-1
Off
Paired
Paired
Paired
Camera-2
Camera-4
Camera-3
On
On
On
2. Press the or button to select the camera;
3. Press the or button to select “On” or “Off”;
4. Press the OK button to confirm and exit.
Special note: When “OFF” is set, the camera does not have any
action, such as monitoring picture display, recording, or automatic
alarm.
● PIP Setting
Set the resolution and pixels for the recorded video.
1. Press the or button to select “PIP Setting”, press the OK
button to enter:
PIP Setting
OK:Options MENU:Quit
2. Press the or button to select the camera;
3. Press the OK button to enter the following interface:
Camera-1 Low High
Camera-2 High
Camera-3 High
Camera-4 HighHigh
High
High