User's Manual

Structure
03
04
Installation
1. Install the camera at the proper monitoring location. The camera
can be installed in two modes:
3. Insert the SD card or connect an external storage device, such
as a mobile hard disk.
Note: It doesn’t support hot plugging of SD card or external storage
device.
Antenna
7"TFT-LCD
Power on/off
OK Button
Navigate Button
Delete file/LCD、TV Switch
Menu
Record/stop Video
Playback Video
Quarter Display Button
Display Mode
Microphone
Bracket
USB Port
SD Card Slot
AV Output
Power
Port
Link Indicator
Power Indicator
Antenna
Power Input
Infrared LEDs
Lens
Bracket
Antenna
Socket
Link
Indicator
Power
Indicator
Pair
Button
Microphone
① Upright installation:
Install the camera
on a level plane.
② Reverse installation:
Install the camera in
the celilng.
2. Install the receiver at a proper location. This receiver is provided
with two kinds of brackets, so it can be installed in two modes:
① Positioned on a level plane ② Mounted to the wall
Use screws to
fix the bracket
to the wall.
Clamp the
receiver on
the bracket
PIR infrared
sensor