User's Manual

15
16
1. In the real-time status, press the MENU button to enter the
following interface:
2. Press the or button to select “Record”;
3. Press the OK button to enter:
Record
Record
OK:Options MENU:Quit
Timer Recording
PIR Recording
● Timer Recording
Set the recording start/stop time. The device automatically records
according to the set start/stop time. After recording, it automatically
saves the video record. For specific steps, see Page 07.
● PIR Recording
If there is human motion detected by any accessed camera,
recording can be triggered. For specific steps, see Page 08.
For specific steps, see Page 08.
Playback
1. In the real-time status, press the MENU button to enter the
following interface:
2. Press the or button to select “Camera”;
3. Press the OK button to enter:
Camera
Camera
OK:Options MENU:Quit
Pairing
Active
PIP Setting
● Pairing
After pairing, the camera is not affected by interference of other
frequencies.
1. Press the or button to select “Pairing”, press the OK button
to enter:
Pairing
OK:Options MENU:Quit
Camera-1
Paired
0xe01f0008
Camera-2 Paired 0xe01f0007
Camera-3 Paired 0xe01f0006
Camera-4 Paired 0xe01f0005