Quick Start Guide

1
HD Outdoor WiFi Camera
Model: T5925HCB
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
- 01- - 02-
Quick Start Guide
-03-
Package List
USB cable
Power adapter
Quick Guide
Screws
The picture is only for reference and the real object shall prevail.
Appearance
Camera
2
1. Find the power interface behind the product and power on the
camera,The indicator will turn on.
2. Please make sure the camera and smart phone are connecting to
the same 2.4GHz band WiFi.
Connect to the power supply
5
Camera Indicator Instruction
-05-
6
3
Technical Parameters
※All parameters change without prior notice. The finial right of
interpretation is reserved by the company.
Resolution
Video Format
Wireless Transmission
Night Vision
View angle
Power Input
Alerts
APP
Waterproof Standard
Working Temperature
1920*1080P
H.264
802.11b/g/n 2.4GHz Wifi
Infrared
horizontal: 80°±5°
5V 1A
Motion detection
Android 4.44 and above,
IOS 9.0 and above
IP66
-10C°- +50C°
Storage
Built in 16GB micro SD card
正面
背面
HD Wi Fi Came ra
Model : T5925H CB
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
Quic k Start G uide
Red light
twinkles slowly
Which means its
successfully turned up.
Red light
twinkles fast
Which means its configuring
the network.
Green light
flashes.
Which means WiFi or the Internet is
linked, in summary, the router is linked.
Green light is
often on.
This indicates that the platform is
connected to view remote videos.
Antenna
Infrared
lamp
Camera
lens
Antenna
Indicator light
(Below the antenna.)
Light
sensor
DC5V
-06-
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
FCC Certification lnfo
-07-
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for recycling
advice.
EU Environmental Protection
Made in China
-04-
Preparation for Installation
Installation
4
AndroidAndroid IOSAndroid
1. 2.4G wireless router is required；
2. Support Android 4.44 and above, iOS 9.0 and above；
3.Download APP: Please select one of below two methods to download
the APP, then complete the installation and account registration，
A：Scan the QR code to download APP
AndroidAndroidAndroid
4. Add a device: Open the APP home page.click the “Add Device”
icon to connect your camera. According to the settings guide in the APP,
you can configure multiple cameras at the same time.
B：Search the APP name “GOSCOM” on the Google play or App Store
Remark: The APP interface may be upgraded and adjusted at any
time, subject to app as its actual basis without prior notice
RF exposure warning :
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment shall be
installed and operated with minimum distance 20cm between the
radiator & body.
This device is acting as slave and operating in the 2.4 GHz (2412
~2462 MHZ) band.
Ad Hoc function is supported but not able to operate on non-US
frequencies.
Do not use the device with the environment which below
minimum -30 ℃ or maximum over 50℃ .
Hereby, we declares that this device is in compliance with the
essential requirements and other relevant provisions of
Directive 2014/53/EU.
Notice: Observe the national local regulations in the location
where the device is to be used. This device may be restricted for
use in some or all member states of the European Union (EU).