User's Manual

ManualsBrandsShenzhen Great Power Innovation And Technology Manualsalarm clocksBLUETOOTH DUAL ALARM CLOCK

210*157mm

Model:75910

Instruction Manual

DC: 052214

0.9 Inch Bluetooth

Speaker Clock

Time Set

Set Alarm 1/Alarm 2

Alarm 1/Alarm 2 ON/OFF

Snooze (temporarily silences alarm)

Nightlight

Warranty Information

FCC Statementon

Get Started

Bluetooth Operation

Bluetooth Button

Volume +Button

Volume -Button

Snooze Button

Time Button

Alarm1Button

Alarm2Button

AL1 ON/OFF

AL2 ON/OFF

PM Indicator

AL1 Indicator

AL2 Indicator

BT Indicator

Step 1:Insert the AC cord into a wall outlet.

Step 2:Battery backup.Insert 2 fresh AAAbatteries into the clock.

Restart: If there is no reading on the LCD or the reading is distorted, unplug

AC cord and remove batteries for 15 minutes. Press any button 20 times;after

15 minutes, start again at step 1.

1.Hold the TIME button to enter time set mode.

2.The Hours will flash.

3.Press the +or – button to adjust the hours. The PM

indicator will light when the hour is advanced into the PM time.

4.Press the TIME button to confirm and move to the minutes.

5.The Minutes will flash.

6.Press the + or – buttonto adjust the minutes.

7.Press the TIME button to confirm and exit.

Setting and activating the time alarms are separate actions.

Set Alarm 1:

1.Hold the ALARM 1 button to enter alarm set mode.

2.The Alarm Hours will flash.

3.Press the + or – buttonto adjust the hours. The PM indicator will light when

the hour is advanced into the PM time.

4.Press the ALARM 1 button to confirm and move to the minutes.

5.The Alarm Minutes will flash.

6.Press the + or – buttonto adjust the minutes.

7.Press the ALARM button to return to time mode.

Set Alarm 2:

Follow steps 1-8 above and use the ALARM 2 button in place of the ALARM 1 button.

Note: If the clock is unplugged briefly and is plugged in again,the clock

may lose Bluetooth connectivity.

Note: This is a power-output charging port. It does not supply power to the

clock.

Note: Some USB cables are for data transfer only and cannot be used for

charging. Make sure that the USB cable you use will charge your device. Most

USB cables included with mobile devices will work for charging.

• 2-AAA LR3 Alkaline batteries.

• Maintains time and alarm function for several hours during power outage.

• Display will appear blank/dark.

• Time appears when AC power restored.

• Do Not Mix Old and New Batteries.

• Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries.

• Do not expose the clock to extreme temperatures, vibration or shock.

• Keep clock dry.

•

Clean the clock with a soft damp cloth. Do not use solvents or scouring agents.

• The clock is not a toy. Keep it out of reach of children.

• The clock is not to be used for medical purpose or for public information,

but is determined for home use only.

Bluetooth Protocol:

Bluetooth Range:

Bluetooth Frequency:

AC Power Cord:

Backup Batteries:

USB Charging Port:

A2DP (V1.2), AVRCP (V1), & HFP (V1.5)

32 feet, 10 meters (open air, no obstructions)

2.40

2GHz-2.480GHZ

TPK800500200-02 5V 2A

2 AAA LR3 Alkaline batteries

1 Amp maximum current (charging cable not included)

• Connect your external device’s USB charging cable (not included) to the USB

charging port.

• Charging times will vary.

• USB Power Output: 1A maximum current. Charge 1A devices or devices that

are self-regulating.

Charge a smartphone, camera or other devices when the clock is plugged into

a power outlet with the included 5V AC adapter.

• If the clock does not work properly, change the batteries and/or check the AC

cord connection.

• The specifications of this product may change without prior notice.

• Improper use or unauthorized opening of housing will void the warranty.

This Equity product is warranted for one year from the date of consumer purchase

against defects in material and workmanship. During this period such defects

will be repaired, or the products will be replaced at Equity’s option, without charge.

This warranty does not cover damage caused by misuse or negligence.

ALL IMPLIED

WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR

FITNESS AND MERCHANTABLITY, ARE LIMITED IN DURATION TO A PERIOD

ENDING ONE YEAR FROM THE DATE OF PURCHASE.

Some states do not allow limitations on how long an implied warranty will last so the

above limitation may not apply to you. This warranty gives you specific legal rights

and you may also have other rights which vary from State to State.

For warranty work, technical support or other information contact:

Equity by La Crosse

Attn: Warranty

2830 S. 26th St.

La Crosse, WI 54601

Contact Support: www.equitybylacrosse.com/support

608-782-1610

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) the device must accept

any interference received, including interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE

CAUSED BY UNAUTHORIZED MODIFICATIONS

TO THIS EQUIPMENT. SUCH MODIFICATIONS

COULD VOID THE USER AUTHORITY TO

OPERATE THE EQUIPMENT.

be reproduced in any form, even in excerpts,

or duplicated or processed using electronic,

mechanical or chemical procedures without

written permission of the publisher.

This handbook may contain mistakes and

printing errors. The information in this

handbook is regularly checked and corrections

made in the next issue. We accept no liability for

technical mistakes or printing errors, or their

consequences.

“The Bluetooth

word mark and logos are registered trademarks owned by Bluetooth SIG,

Inc. and any use of such marks by Equity by La Crosse is under license. Other trademarks

and trade names are those of their respective owners.”

Note: When the alarm sounds the Bluetooth function will be disabled.

• Slide the OFF-AL1-ON button to activate or deactivate alarm 1.

• Slide the ON-AL2-OFF button to activate or deactivate alarm 2.

• When the alarm sounds, press the SNOOZE button to silence the alarm for

about 9 minutes.

• Repeat the snooze feature up to 13 times (about 120 minutes).

• Press any button except snooze to silence the alarm for one day.

The clock has a nightlight below the time that stays on when operating on AC

power.

Note: The clock will return to the time display if no buttons are pressed

for 30 seconds.

Model: 75910 www.equitybylacrosse.com/supportPage | 1

1.Press the BLUETOOTH

button to enter Bluetooth mode.

2.The Bluetooth indicator light on the display will blink until

there is connection with your mobile device.

3.Activate the Bluetooth function on your mobile device to pair with the clock.

When connected, your mobile device will show “Equity 75910”.

4.A tone will sound when pairing is complete. No code is required.

5.Use the

–

buttons to adjust the volume (8 levels).

6.Press the BLUETOOTH

button again to disconnect.

AL1

AL2

12358

Model: 75910 www.equitybylacrosse.com/supportPage | 2

USB Charging Port

Battery Backup

Specifications

Care and Maintenanace

Model: 75910 www.equitybylacrosse.com/supportPage | 3 Model: 75910 www.equitybylacrosse.com/supportPage | 4

Printed in China Made in China

ALARM 1

Summary of content (2 pages)

PAGE 1
210*157mm Model:75910 Instruction Manual DC: 052214 0.9 Inch Bluetooth® Speaker Clock 8 5 3 4 2 1 9 1 Bluetooth Button 2 Volume +Button 3 Volume -Button 6 7 4 Snooze Button 5 Time Button 7 Alarm2Button 8 AL1 ON/OFF 9 AL2 ON/OFF 10 10 PM Indicator 13 11 AL1 Indicator PM AL1 BT AL2 11 12 12 AL2 Indicator 13 BT Indicator Get Started Step 1:Insert the AC cord into a wall outlet. Step 2:Battery backup.Insert 2 fresh AAAbatteries into the clock.
PAGE 2
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.