User's Manual

ManualsBrandsShenzhen Ground ManualsAudio EquipmentBluetooth Sleeping Mask Headphone

BT SPEAKER MASK (SLEEP SOUNDS)

PACKING LIST

* BT SPEAKER MASK*1

* User manual*1

* USB charging cable*1

* Carry bag*1

PRODUCT SPECIFICATION

Bluetooth version: V5.2

Function: Bluetooth, Sleep sounds, Hands-free

Rated Voltage: 5V/100mA

Rated Power: 70mW

Speaker: 30mm

SNR: ≥96dB

Working Distance：10 Meters

Battery：3.7V/200mAh Lithium battery

Charging time: about 2.5 Hrs

Play Bluetooth music time: 6-8Hrs

Play sleep sounds time:more than 10 Hours

Product size:450*110(MM)

Frequency response: 20Hz-20kHz

White noise source: 10 types

CHARGING FUNCTION

Use a USB cable to connect the headphone to USB charger or your computer USB port (Micro USB to USB Cable included).

There is a notification LED light in our device, RED light shows that device is charging, Red light change into blue light

mean fully charged. ( Note: There is a hidden charging port in the sleeping headphone that you can use it conveniently )

HOW TO CONNECT BLUETOOTH

1.Turn Bluetooth off when you're not using it.

2.Long press the “ ”button to turn on, the red light & blue light flash.

3.Double press “ ”to change mode, the blue light will flash.

4.Turn on Bluetooth with your phone, find device name“IAHB33”then connect.

5.You can enjoy music after Bluetooth connection.

Summary of content (4 pages)

PAGE 1
BT SPEAKER MASK (SLEEP SOUNDS) PACKING LIST * BT SPEAKER MASK*1 * User manual*1 * USB charging cable*1 * Carry bag*1 PRODUCT SPECIFICATION Bluetooth version: V5.2 Function: Bluetooth, Sleep sounds, Hands-free Rated Voltage: 5V/100mA Rated Power: 70mW Speaker: 30mm SNR: ≥96dB Working Distance：10 Meters Battery：3.7V/200mAh Lithium battery Charging time: about 2.
PAGE 2
Note: Bluetooth devices can only be paired on a one-to-one basis, you can disconnect the Bluetooth on smart phone, or Triple press “ ”to disconnect the Bluetooth with the previous device when connect a new device, HOW TO FIT ON YOUR FACE 1. Gently place mask over face. 2. Adjust velcro length for optimal fit and comfort. 3. Gently adjust nose wing for optimal light blocking. INSIDE EARPLUG INSTRUCTION 1. Roll and compress earplug. 2. Reach over head and pull top of ear upward.
PAGE 3
Tips!!! 1. Make sure the Bluetooth is opening in your phone and find device name“IAHB33”and connect. 2. Please take out the Bluetooth headphone before you wash it. 3. Bluetooth speakers could be adjustable for all head size. 4. Please check USB cable if the headphone can't be charge. 5. Please adjust the volume from your mobile or long press Vol+ if you can't hear any sound. 6. The sound may have a bit noise if there's environmental interference.
PAGE 4
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.