User's Manual

KEY_7
7
Pre-dial 7 7 Dial 7 Dial 7 7
KEY_8
8
Pre-dial 8 8 Dial 8 Dial 8 8
KEY_9
9
Pre-dial 9 9 Dial 9 Dial 9 9
KEY_STAR/LO
CK
*
Pre-dial *
Toggle key lock
(Hold)
Dial *
Go into
DTMF mode
from pulse
Dial *
Go into
DTMF mode
from pulse
*
KEY_HASH
#
Pre-dial # Toggle to
display
additional
digits
Dial #
Go into
Conference
call
Dial #
Go into
Conference
call
#
Short press is less than 1 second
Long press is more than 1.5 second
Hold is press and hold more than 3 seconds
KEY_MEM will not be used for Exit or cancel in any mode, with the exception of Redial list, CID list
and when modifying a Phonebook entry, where the functionality will remain as described in DECT 20-1
specification. In these instances, KEY_MEM will remain as Exit. In all other cases, KEY_MEM is
assigned only to activating Phonebook.
KEY_CLEAR will be used as Exit for all modes, except where text entry is in progress
or when
KEY_CLEAR is used to delete a Redial / CID item.
During text entry, a long press of KEY_CLEAR will
clear all text displayed.
1.3.1.1 TIME Entry
The following rules will be applied for the user entering of Time.
• Time range is between 00 :00 – 23 :59.
• Only numeric values are permitted for entry, any other key press with emit an error beep
• The first digit will be enabled only for {0,1,2} other digits will be ignored and make and error
beep
• When the first digit is set to 2, pressing 0-3 on the second digit will advance the cursor.
Pressing 4-9 will not change the digit, and an error beep would be heard.
• When the second digit is greater than 3, pressing 0-1 on the first digit will advance the cursor
to the second digit. Pressing 2 will not change the first digit, and an error beep will be heard.
The user is expected to change the second digit before entering the first digit.
• The third digit will enable {0-5}, other digits will be ignored when pressed.
• The fourth digit will be enabled for {0-9}
• The user will not be able to enter a temporary illegal number.
• In addition, the user will be able to exit from time entry, by pressing <KEY_CLEAR>. In this
case, no changes will be made to the time entry, and the user will return to the menu one level
above.
1.3.1.2 Spanish key entry
First press Second press Third press Fourth press Fifth press
Space
- 1
A B C 2
D E F 3
14 of 83